BWDK-S201G Dry type Transformer Temperature Controller

BWDK-S201G Fujian Yingnuo Dry Transformer Temperature Controller

BWDK-S201G is a small embedded multifunctional computer temperature controller developed and designed by Fujian Fuzhou Yinuo Electronic Technology Co., Ltd. for stable and safe operation of forced air cooling. Using Pt100 platinum thermistors embedded in the three-phase winding packages of dry-type power transformers to detect the temperature rise of the dry-type power transformer packages, and automatically controlling the start and stop of the cooling fan, overheating alarm, and even ultra-high temperature tripping based on the temperature rise to ensure the safe operation of dry-type power transformers. Due to the use of advanced single-chip computers and advanced storage and adjustment technologies, designed and developed according to the JB/T7631 standard, the dry temperature controller has the characteristics of simple structure, reliable operation, and strong anti-interference ability. At the same time, the temperature controller also has a "black box" function, which can record the temperature of the winding package and the working status of the machine before the power outage.

Fujian Yingnuo BWDK-S201G Dry Type Transformer Temperature Controller Product Introduction

The stable operation of transformer windings in dry-type transformer manufacturers or users of power transformers determines the service time and frequency of transformer failure. During the operation of transformers, it is common for the winding temperature to be too high. The temperature of the transformer winding exceeds the maximum operating temperature, resulting in insulation damage and affecting the normal operation of dry-type transformers. The BWDK-S201G series dry-type transformer temperature controller (referred to as the temperature controller) developed by Fujian Yingnuo Technology is an intelligent temperature controller specifically designed for the stable and long-term operation of dry-type transformers. The electronic temperature controller adopts a professional research and development level, using the platinum thermistor embedded in the pre embedded dry-type transformer to monitor and digitally display the temperature rise of the transformer winding during operation. Through simple and convenient intelligent control, it automatically starts or stops the cooling fan of the dry-type transformer, allowing the cooling system to cool the transformer winding and avoid dry-type transformer faults caused by high temperatures during operation. The BWDK-S201G model temperature controller can also provide over temperature alarm function and over temperature trip output function, allowing the dry-type transformer to operate stably within the required control range, thereby extending the working time of the dry-type transformer.

BWDK-S201G Fujian Yinuo dry-type transformer temperature controller S201D/E/F/G/I series intelligent electronic temperature controller manufacturer models are complete and supplied

The sales and wholesale models of Yingnuo dry-type transformer temperature controllers are complete. The official website of Yingnuo Technology temperature controllers provides a detailed introduction, manufacturer's contact phone number, wholesale procurement quotation for temperature control boxes, website product images, specifications, brand models, dry-type transformer temperature control box wiring diagrams, etc. The production and sales models of Yingnuo Technology temperature controllers in Fuzhou, Fujian include:

BWDK-S series temperature controller:

BWDK-S201D

BWDK-S201E

BWDK-S201F

BWDK-S201G

BWDK-S201I

BWDK-S201EF

BWDK-S201EFG

BWDK-S201EG

BWDK-S201FG

BWDK-S201EI

BWDK-S201EFGI

BWDK-S23207

BWDK-S3207A

BWDK-S3207B

BWDK-T series temperature controller:

BWDK-T3208A

BWDK-T3208B

BWDK-T3208E

BWDK-T3207A

BWDK-M series temperature controller:

BWDK-M3207A

BWDK-M3208A

BWDK-M3207B

BWDK-M3207C

BWDK-M3208D

BWDK-M3208E

BWDK-M3208F

BWDK-F series temperature controller:

BWDK-F3207

BWDK-F3207A

BWDK-F3208E

BWDK-YXG series temperature controller:

BWDK-Y3207

BWDK-Y3208E

BWDK-X3207

BWDK-X3208E

BWDK-G2222

BWDK-G2220

BWDK-G2221

BWD-4K02

BWD-4K-B

BWD-4K208

BWD-4K130

BWD-4K130Q

BWDK-4K201R

BWDK-4K201

BWD-4K208D

BWD-4K-B

BWD-4K-CEF-6

BWD-4K-CD-6

BWD-4K-CG-6

BWD-4K-CI-6

BWD-4K-BF

BWD-4K-BD

BWD-4K-BG

BWD-4K-CI

BWD-4K-CI-6

BWD-4K-CF

BWD-4K-CE

BWD-4K360

The main product models of the BWDK-S201G dry-type transformer temperature controller from Fujian Yinuo include:

If the transformer needs to undergo a voltage withstand test, please separate the sensor plug from the temperature controller before the voltage withstand test. This can avoid damaging the temperature controller due to partial discharge of the transformer.

2. Temperature controllers are precision instruments. Please handle them with care during transportation and installation to avoid unnecessary safety hazards.

3. After unpacking the thermostat, please verify whether the thermostat accessories are complete according to the attached list. If it is not complete, please contact the supplier.

4. Before installation, the temperature controller and sensor components should be inspected for the product. To eliminate accidental damage to the temperature controller during transportation and storage. This temperature controller uses high-quality sensors as accessories, but to ensure the service life of the sensors, please do not use open flames to continuously barbecue the temperature measuring probe. If it is necessary to test the temperature measuring probe, please heat it evenly. When heating, the temperature should be controlled within 250 degrees Celsius or each heating should not exceed 2 seconds.

5. When making external connections, please refer to the wiring diagram inside the temperature controller and pay attention to whether the wiring terminals are active or passive.

6. After connecting the wires to the thermostat, please check that the wiring is correct before powering on.

Fujian Yingnuo BWDK-S201G Dry Type Transformer Temperature Controller Series Model Temperature Controller Manufacturer Introduction Information:

The official website of Fuzhou Yinuo provides transformer temperature controller models, transformer temperature controller prices, and transformer temperature controller quotations. Please feel free to call for inquiries. Transformer temperature controller manufacturers are all located in Fuzhou Yinuo! We provide Yingnuo Technology dry-type transformer temperature controllers, Fujian intelligent temperature controller manufacturer direct sales, Shanxi intelligent temperature controller manufacturer, Zhejiang dry-type transformer temperature controller manufacturer, Sichuan temperature controller manufacturer, Xi'an electronic temperature controller manufacturer, Guangdong intelligent temperature controller manufacturer sales, Zhejiang intelligent temperature controller manufacturer, Xinjiang intelligent temperature controller manufacturer prices, Beijing intelligent temperature controller manufacturer wholesale, Jiangsu intelligent temperature controller manufacturer, etc. We specialize in producing dry-type transformer temperature controllers, order quality assurance, trust and trust contract enterprises. If you want to buy good dry-type transformer temperature controllers, please come to Fuzhou Yingnuo Technology. We specialize in selling dry-type transformer temperature controllers, which are widely used in power monitoring, security, and Internet of Things applications. We specialize in producing BWDK-S201G dry-type transformer temperature controllers. Our dry-type transformer temperature controllers/controllers are reliable in quality and reasonably priced. We welcome inquiries from manufacturers. Our factory has passed ISO9001 certification, with strong production capacity and short delivery time. We welcome inquiries from leading brands of temperature controllers in China!

Which company has the best quality for dry-type transformer temperature controllers

Yingnuo Technology provides reliable temperature control systems and solutions for dry-type transformer manufacturers nationwide. There are numerous cases in China, including the development of temperature control systems for projects such as TBEA, Nanning Metro, Guangzhou Metro, and Nanjing Metro. Yingnuo Technology is a high-tech enterprise specializing in scientific research and development, production, sales, and service. The company's main products include dry-type transformer temperature controllers, fluorescent fiber optic temperature measurement and control systems, and rail transit temperature controllers. After 5 years of collaboration with universities such as Fuzhou University, we have successfully developed a fluorescent fiber optic temperature sensor with independent intellectual property rights. We have multiple invention and utility model patents and provide overall solutions and application services for temperature, vibration, pressure monitoring in various fields such as comprehensive pipe galleries, oil and gas pipelines, rail transportation, power, municipal engineering, nuclear power, new energy, and chemical engineering. Our technical performance has reached the advanced level in China, and the quality of transformer temperature control switches is high. Inno Technology is committed to becoming a global professional provider and application service provider of overall solutions for temperature control and temperature measurement systems.

• Prev：Temperature controller power supply and alarm temperature for dry-type transformers
• Next：Temperature regulations for dry-type transformers